Leprecon LP-X48 Quick Start Manual de usuario descargar pdf

Pro Lighting Equipment

LP-X48 Quick Start VGA/Touchscreen Mode Operation

There are three separate modes of operation for the LP-X48:

• VGA Mode makes good use of the expanded viewing area of a larger screen while also offering

trackball & keyboard support for programming.

• VGA Mode with the Touchscreen capability gives you the features of the VGA with the added

benefit of touch activation.

• LCD Mode does not require any peripheral devices for programming making it ideal for

programming in spaces where real estate is at a premium.

This document will cover programming with VGA Mode alone.

To start it is recommended that you start with a new show. To do so enter the ‘Set up’ section > go to

‘Erase’ icon > select ‘Entire Show’.

Moving Light or Color Scroller Assignment- The first 200 of the 1024 DMX Channels are reserved for

conventional fixtures therefore the console defaults to DMX Channel 101 on Universe A when assigning

moving lights/LTP Instruments. The ‘Reserve List’ may be altered if required, see instructions beginning on

Page 38 for a more detailed example.

To begin:

1) Enter the ‘Set Up’ section located in the upper left-hand corner of the console.

2) Select- ‘Instrument’ icon

3) Using the trackball or touchscreen point to the first empty slot and select

4) Choose fixture manufacture and double click/tap on the model.

5) Once the fixture has been selected the console will load the profile and look for the

first available Slot and DMX starting channel. You can either alter or accept as

needed.

6) The buttons beneath the control faders are instrument select buttons in ‘Record’ or

‘Edit’ mode and they are also Bump Buttons for the conventional fixtures in ‘Run’

mode.

Selecting Intelligent Instruments- the LP-X48 has the ability to control up to 48 intelligent

instruments. Instruments can be selected with the ‘Instrument selects’ located beneath the control

faders or in the Programmer screen with the trackball or touchscreen. Fixtures 1thru 48 can be

selected via the numerical keypad or with the trackball or touchscreen on the VGA.

The status indicators are as follows:

Selected: Responds to Programmer

Yellow on VGA Screen/ Blinking LED on ‘Instrument select’

1 2 3 4 5

Indice de contenidos

Pagina 1

Pro Lighting EquipmentLP-X48 Quick Start VGA/Touchscreen Mode OperationThere are three separate modes of operation for the LP-X48:• VGA Mode makes g

Pagina 2

Pro Lighting EquipmentStandby: In the cue, holding positionBlue on VGA Screen/Lighted LED on ‘Instrument select’Cleared: Not in the cueWhite on VGA S

Pagina 3

Pro Lighting EquipmentCreating Labels-1) Select the fixtures for which you would like to create a label.2) Point & Click/Press on the ‘Focus’ i

Pagina 4

Pro Lighting EquipmentConventional Instruments- There are a total of 192 Control channels for conventional instruments, withchannels 1-48 accessible

Pagina 5

Pro Lighting EquipmentTips & TricksClear the programmer with Clear + Enter x 2Clear Manual channels with Clear + ‘Channel’ buttonClear a Playback

Comentarios a estos manuales

Sin comentarios

Leprecon LP-X48 Quick Start Manual de usuario

Busca en linea o descarga Manual de usuario para Panel De Control Leprecon LP-X48 Quick Start. Leprecon LP-X48 Quick Start User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Panel De Control Leprecon LP-X48 Quick Start