Leprecon LP-612 Manual de usuario descargar pdf (Pagina 21)

Preset Playback

Once scenes have been recorded into the Preset Memory faders on the LP600, they are

immediately available for use. It is not necessary to leave the record mode to check or playback

the memory.

With the master fully up, bringing up the fader for a memory scene will output the scene to the

stage. Any number of faders can be up at one time, the scenes 'pile on' in a higher takes

precedence fashion.

Previewing Presets

From the preset page display, pressing the Presets menu button again will set the console to the

Preview mode. This will be indicated by the 'preview' LED. The preview mode is available only if

the 'preset on' LED is lighted, which indicates a page number of 1 through 4 is selected.

now

time

step

rate

pattern

preview

bump

page

612

In Preview mode, the green output level LED’s no longer represent the on-stage levels. The LED’s

now show the channel levels as stored in the selected preset scene. The LED’s next to the bump

buttons are steadily lit, indicating the bumps function as presets selects.

The first time this mode is entered after startup, the preset number 1 is selected. This number can

be changed by pressing the up or down arrow keys or by pressing the bump button below the

preset to be previewed.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 30 31

Sin comentarios

Leprecon LP-612 Manual de usuario Pagina 21